Apollo Go hook magnet falling off *solution*

When the magnet on an Apollo Go's hook falls off, the easiest fix is to glue it back: rough up the hole the magnet sits in with a little sandpaper, then fix the magnet in place with a strong epoxy such as Gorilla Glue Epoxy.

This was mostly reported on early batches of the Apollo Go and has been resolved in the latest iteration.

What is needed

• A small piece of sandpaper

• A strong epoxy adhesive (recommended: Gorilla Glue Epoxy)

• The detached magnet and the hook

Steps

• Rough up the surface of the hole where the magnet sits with the sandpaper.

• Apply the epoxy to the prepared surface.

• Place the magnet back in position.

• Let the epoxy cure fully, following the product's instructions.

Why it works

Roughing up the surface lets the adhesive bond better to the metal, and a strong epoxy gives an extremely strong bond.

The recommended epoxy: Gorilla Epoxy on Amazon Canada